Search results

One of a series of papers presented at a Symposium on the Cost Effectiveness of Sprayed Metal Coatings, organised by the Association of Metal Sprayers.

Thermal spraying is a problem‐solving technology which contributes to almost every branch of engineering from the extraction and production of raw materials to the manufacture of usable articles. By placing the correct surfacing material where it is best employed, thermal spraying allows engineers to improve product performance, reduce maintenance times and costs, save energy and reduce production costs. As the demands of other technologies have increased the thermal spraying industry has responded by providing surfaces which will reliably withstand higher loads, faster speeds, higher temperatures and more aggressive environments. Over the past decade, building on previous knowledge and experience, thermal spraying technology has contributed to the engineering successes in many spheres by enabling the engineer to apply the right surface to the optimum basis material at reasonable cost.

To solve the problem of oil film thinning when hydrostatic thrust bearings are overloaded or rotating at high speed, the dynamic pressure formed by tiny oil wedges is used to compensate, and the optimum height of oil wedges is determined by the compensation rate to improve the bearing capacity of hydrostatic thrust bearings.

This research method is aimed at the new type of double rectangular cavity static bearing with microbevel surface of q1-205. The wedge parameters of oil film were defined. The oil film lubrication performance of the bearing with the wedge parameters of 0, 0.02, 0.04, 0.06, 0.08 and 0.10 mm was simulated by the finite volume method, the comprehensive influence law of the wedge-shaped parameters on the vorticity and flow rate of the oil cavity pressure fluid was revealed. Finally, the oil cavity pressure changes of oil films with different wedge parameters under certain load and speed were tested by design experiments, and the theoretical analysis and simulation were verified.

This study found that the oil film wedge shape can well compensate the static pressure loss caused by the high-speed or heavy-duty operation of the bearing, but the dynamic pressure effect of the wedge shape does not always increase with the increase of the wedge height. The oil film exhibits superior lubrication performance in the range of 0.06–0.08 mm.

The original hydrostatic oil pad was designed as a microinclined plane, and the dynamic pressure caused by the microwedge of the oil pad was used to compensate the static pressure loss of the bearing. The lubrication performance of the oil film under the condition of varying viscosity was obtained by using the simulation method.

The purpose of this paper is to investigate the effect of different wedge shapes on the performance of air foil thrust bearing (AFTB).

During the study, a bump foil stiffness model considering slip deformation and a two-dimensional sheet top foil model is established, and the Reynolds equation and film thickness equation is solved using the finite difference method and finite element method. The static performance such as load carrying capacity, friction torque and power loss of AFTB under different taper parameters is obtained. The influence of different pitch ratio, film thickness ratio and wedge shapes on the bearing characteristics is studied.

There is an optimal height and a pitch ratio for the taper of AFTB with certain tile number. Compared to the plane and concave wedge shape, the upper convex shape can enhance the convergence effect of the wedge region, increase the effective film pressure distribution area of the bearing and reduce the local concentrated load of the top foil, which is more conductive to the increase of load capacity.

The wedge shape parameters bring a fundamental difference in the static performance of AFTB. The results are expected to be helpful to bearing designers, researchers and academicians concerned.

Since its introduction by Chari, Kehoe, and McGrattan (2007), Business Cycle Accounting (BCA) exercises have become widespread. Much attention has been devoted to the results of such exercises and to methodological departures from the baseline methodology. Little attention has been paid to identification issues within these classes of models. In this chapter, the authors investigate whether such issues are of concern in the original methodology and in an extension proposed by Šustek (2011) called Monetary Business Cycle Accounting. The authors resort to two types of identification tests in population. One concerns strict identification as theorized by Komunjer and Ng (2011) while the other deals both with strict and weak identification as in Iskrev (2010). Most importantly, the authors explore the extent to which these weak identification problems affect the main economic takeaways and find that the identification deficiencies are not relevant for the standard BCA model. Finally, the authors compute some statistics of interest to practitioners of the BCA methodology.

Several graphs, streamlines, isotherms and 3D plots are illustrated to enlighten the noteworthy fallouts of the investigation. Embedding flow factors for velocity, induced magnetic field and temperature have been determined using parametric analysis.

Ternary hybrid nanofluids has outstanding hydrothermal performance compared to classical mono nanofluids and hybrid nanofluids owing to the presence of triple tiny metallic particles. Ternary hybrid nanofluids are considered as most promising candidates in solar energy, heat exchangers, electronics cooling, automotive cooling, nuclear reactors, automobile, aerospace, biomedical devices, food processing etc. In this work, a ternary hybrid nanofluid flow that contains metallic nanoparticles over a wedge under the prevalence of solar radiating heat, induced magnetic field and the shape factor of nanoparticles is considered. A ternary hybrid nanofluid is synthesized by dispersing iron oxide (Fe3O4), silver (Ag) and magnesium oxide (MgO) nanoparticles in a water (H₂O) base fluid. By employing similarity transformations, we can convert the governing equations into ordinary differential equations and then solve numerically by using the Runge–Kutta–Fehlberg approach.

There is no fund for the research work.

This kind of study may be used to improve the performance of solar collectors, solar energy and solar cells.

This investigation unfolds the hydrothermal changes of radiative water-based Fe₃O₄-Ag-MgO-H₂O ternary hybrid nanofluidic transport past a static and moving wedge in the presence of solar radiating heating and induced magnetic fields. The shape factor of nanoparticles has been considered in this study.

The purpose of this paper is to derive the dyadic representations of Green’s function in lossy medium because of the electric current dipole source radiating in close proximity of a PEC wedge and to reveal the effect of conductivity on the scattered electric field.

By using the scalarization procedure, the paraxial fields are obtained first and then scalar Green’s functions are used to derive asymptotic forms of the dyadic Green’s functions. The problem is also analyzed by the image theory and analytical derivations are compared. However, analytically calculated results are validated with FEKO, a commercially available numerical electromagnetic field solver.

The results indicate that excellent agreement is observed between analytical and numerical results. Moreover, it is found that the presence of conductivity introduces a reduction in scattered electric fields.

Asymptotically derived forms presented in this study can be used to calculate field distributions in the paraxial region of a wedge in a lossy medium.

Gives introductory remarks about chapter 1 of this group of 31 papers, from ISEF 1999 Proceedings, in the methodologies for field analysis, in the electromagnetic community. Observes that computer package implementation theory contributes to clarification. Discusses the areas covered by some of the papers ‐ such as artificial intelligence using fuzzy logic. Includes applications such as permanent magnets and looks at eddy current problems. States the finite element method is currently the most popular method used for field computation. Closes by pointing out the amalgam of topics.

The purpose of this paper is to examine the magneto hydrodynamic flow and heat transfer of nanofluids over a permeable wedge based on engine oil which is under the effects of thermal radiation and convective heating.

The equations governing the flow are transformed into differential equations by applying similarity transformations. Keller box method is used to bring out the numerical solution.

The discovery interprets that temperature as well as the velocity of Ag-engine oil nanofluids are more noticeable than Cu-engine oil nanofluids. Thermal boundary layer increases for radiation parameter as well as Biot number. Fluctuations of co-efficient of drag skin friction as well heat transfer rate at the wall are also tested.

Till now, no numerical studies are reported on the heat transfer enhancement of the permeable wedge under thermal radiation on engine oil nanofluid flow by considering convective heating.

The purpose of this study is to analyze the impact of chemical reaction and thermal radiation on mixed convection flow, heat and mass transfer characteristics of nanofluid through a wedge occupied with water–TiO₂ and water–Al₂O₃ made nanofluid by considering velocity, temperature and concentration slip conditions in present investigation.

Using acceptable similarity transformations, the prevailing partial differential equations have been altered into non-linear ordinary differential equations and are demonstrated by the diverse thermophysical parameters. The mathematical model is solved numerically by implementing Galarkin finite element method and the outcomes are shown in tables and graphs.

The temperature and concentration fields impede as magnetic field parameter improves in both water–Al₂O₃ and water–TiO₂ nanofluid. While there is contradiction in the velocity field as the values of magnetic field parameter rises in both nanofluids. The non-dimensional velocity rate, rate of temperature and rate of concentration rise with improved values of Weissenberg number.

Nanofluid flows past wedge-shaped geometries have gained much consideration because of their extensive range of applications in engineering and science, such as, magnetohydrodynamics, crude oil extraction, heat exchangers, aerodynamics and geothermal systems. Virtually, these types of nanofluid flows happen in ground water pollution, aerodynamics, retrieval of oil, packed bed reactors and geothermal industries.